IOT Workshop Materials

Follow all the steps, these are the pre-requisites for the workshop:


  1. Micro Controllers and Arduino boards: GOOGLE 
  2. Programming Language C in 1h : Click Here 
  3. Programming Language C++ 1h : Click Here 
  4. Learning python in 12 mins : Click Here
  5. Install Python 2 or 3 : Click Here and Follow Instructions : Click Here
  6. About ESP8266 : Click Here
  7. Motor Driver Basic : Click Here
  8. Arduino IDE for Linux UBUNTU users : Open terminal and type 
              sudo apt-get install arduino
    For Windows users : Click Here and then install the software. 
  9. Go to arduino preferences and add the following line in the additional board url:
  10. Linux (UBUNTU or MINT) is preferred as operating system. Windows 7 PC is quite fine. For windows 8/8.1/10 PC:Click start and type : cmdRun it as Administrator and type (Press enter after each line) : 

    bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS

    bcdedit.exe -set TESTSIGNING ON 

  11. Learn a bit About JSON from: Here

  12. Bring up with:
    1. Paper and pens
    2. Fresh Brain 
  13. Here goes the ready-made codes : Download